Let's find out the prerequisites to install POS PRINTER DRIVER ESC/POS on Windows PC or MAC computer without much delay. Fidelier published POS PRINTER DRIVER ESC/POS for Android operating system mobile devices, but it is possible to download and install POS PRINTER DRIVER ESC/POS for PC or Computer with operating systems such as Windows 7, 8, 8.1, 10 and Mac. PS.Download POS PRINTER DRIVER ESC/POS PC for free at BrowserCam. Go to Printers & Scanner in your windows, click “add a printer or scanner”, click “the printer that I want is not listed”, then

OK, now the printer and your device are in the same IP section so they can connect. Now reset the ip address to it’s original via going to control panel -> network and internet and select Obtain an IP address auto Now press the Hold button in front of the printer, restart and keep holding this button for 6 seconds and then release it, the printer should print a self-test page, check the ip address whether new ip is printed here. If there is nothing wrong, you should be able to hear a few beeps from printer if there is no beep, there must be something wrong. SSID and wifi key is the one your device is connecting to, Try to set it like above, the IP address will be new printer ip address, Now go back to xprinter.exe, click Advanced-> set Net, and see this configuration. Go to control panel -> network and internet-> and find the ip4 address for your wifi, if you do not know how to do this, please refer to this page

The printer default ip address is 192.168.123.100, so first step is to change local device IP into the same section as the printer. Important:Your device may have more than one ip address,must use the wifi ip4 address. Install Driver as above how the USB port is installed.Īs the UI displays the local IP address is your pc / laptop ip address, you need make a note, so take a screenshot of this UI.Use Net cable to Connect router and printer.

Now you can configure through property page, if no problem, you should be able to “Print Test Page” without any problem. Select your window OS, printer interface is USB and XP-80C which is for auto-cut option.Ĭlick “Check USB Port” if you want to check the printer is connecting to device. Setup the printer to print using USB Cableĭownload printer driver from Here or copy below address into browserĬonnect the printer with your device using usb cable, power on the printer.ĭouble click “XP80 Driver Setup V7.77.exe”, and click a few simple buttons and then you should be able to see this page.

Pos printer driver v7.77